#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
    #version_standard duty
    #version_standard duty
    #version_standard duty
    #version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
    #version_standard duty
    #version_standard duty
    #version_standard duty
    #version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty
#version_standard duty

Product Information

Characteristics

 

PIERCE STANDARD DUTY CATTLE SIREN

Call in cattle with the PIERCE cattle siren.

The 12-volt standard PIERCE Cattle Siren requires a 12 v battery and momentary switch to operate.

Product Specifications

  • Dimensions 6 1/8" x 5" x 5"
  • Sensitive 105 dB
  • 2-minute run time

When not purchasing the PIERCE heavy duty wiring kit, we recommend using a 14 to 12 gauge wire with a 25 amp fuse.

 

Check out how to install the PIERCE Standard Duty Cattle Siren here.

Specifications

OPERATING VOLTAGE 12 Volts DC
DUTY CYCLE 2 Minutes
SENSITIVITY (DB) 105
OVERALL DIMENSIONS 6 ⅛" x 5" x 5"

Resources

Spec Sheet

Instructions

Installation

  1. Keep the PIERCE cattle calling siren away from tires. During rain the tires kick up water and may damage the siren.
  2. Mount it away from places where low lying trees or brush could damage it.
  3. Ideally mount the siren to any flat surface. For example, the headache rack or in the engine bay compartment.
  4. The livestock siren can be mounted using ¼” bolts or #10 self tapping screws.
  5. Bolt or screw through the mount to the surface you are attaching the siren.
Characteristics

 

PIERCE STANDARD DUTY CATTLE SIREN

Call in cattle with the PIERCE cattle siren.

The 12-volt standard PIERCE Cattle Siren requires a 12 v battery and momentary switch to operate.

Product Specifications

  • Dimensions 6 1/8" x 5" x 5"
  • Sensitive 105 dB
  • 2-minute run time

When not purchasing the PIERCE heavy duty wiring kit, we recommend using a 14 to 12 gauge wire with a 25 amp fuse.

 

Check out how to install the PIERCE Standard Duty Cattle Siren here.

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
25%
(1)
0%
(0)
0%
(0)
M
Matt Rutland

Good siren

M
Michael Heatherly
Two thumbs up!!

Replaced an old worn out siren with the heavy duty from Pierce. All I had to do is hook it up and off we went.

B
Brandon Ingram

Cattle Siren

S
Shawn Cummings

Not as loud as advertised, but it works for cattle within 1/4 mile.

Standard Duty Cattle Siren

4.5

PCH324K

$100.49
$100.49
Shipping calculated at checkout.
Kit:
In Stock

Check Out These Related Products